| USED E-Z GO Industrial 875E Cart. EZGO
Like New E-Z GO Industrial 875E Cart
STANDARD EQUIPMENT: Motor: Heavy-duty 48 volt DC, high efficiency series wound, brazed armature, solid copper windings. Vented 5.5 HP @ 1980 RPM (1) hour. Drive Train: Direct motor shaft connected to transaxle pinion shaft. Transaxle: High efficiency differential with helical gears, 14.78:1 ratio. Brakes: Hydraulic, drum type, dual rear wheel brakes. Hand ratcheted parking brake. Non-asbestos lining. Electrical System: 48 volt DC, eight, 6 volt heavy duty, deep cycle storage batteries (107 minute, 220 amp-hour @ 20 Hr. discharge rate). Speed Control: Solid State HDI Controller, 350 amp rated. Charger: Powerwise™ on board fully automatic line compensating, 21 amp DC output at 48 volts; input 110 -120 volts, 12.6 amps, 60 cycle AC, Underwriters Laboratories (U.L.) Listed, C.S.A. Certified, anti drive away charger/vehicle interlock. Steering: Double reduction rack and pinion. Front Suspension: Heavy duty multiple leaf springs with hydraulic shock absorbers. Rear Suspension: Heavy duty multiple leaf springs with hydraulic shock absorbers. Seating: Vacuum formed fabric backed vinyl covers over thick cushion foam. Individual seat bottoms and bench seat back. Seating for two occupants. Speed: 12 MPH (Unloaded)
DIMENSIONAL SPECIFICATIONS: Weight: 995 lbs., without batteries Length: 116” inches Width: 44.5 inches Height: 45 inches (at steering wheel) Floor Height: 14.75 inches Cargo Deck Height: 27.0 inches (28.2 inches to top of frame) Cargo Deck Size: 44.50 inches wide, 69 inches long Ground Clearance: 5 inches (at differential) Seat Height: 30.8 inches Wheel Base: 56.0 inches Turning Clearance Diameter: 20’11” feet Intersection Aisle Clearance: 84” inches Tires: 5.70 x 8 (8 ply rated) USA Trail, Load Range D Load Capacity: 3,000 lbs. (including operator, passenger, accessories and cargo)
|
