Used to store large, bulky items that
are loaded by hand only.
Store palletized loads and large loads
handled by powered equipment.
Maximum density storage of similar
palletized loads. Minimum access, machine loaded.
Use to store long, flat items such
as sheets, bars, or tubes. Hand or machine loaded.
CONSTRUCTION
Welded or bolted upright frames, with
beams that bolt or clip in place.
Welded upright frames, with beams
that bolt or clip into position.
Welded upright frames, with isle ties.
Short arms hold rails supporting pallets.
Upright columns with bolted on base
legs. Arms bolt in place.
CAPACITY
per level
750-1000 lbs.
(per level)
2000-10000 lbs.
(per level)
2000-6000 lbs.
(per pallet)
500-2000 lbs.
(per arm)
DIMENSIONS
Width
48" to 96"
48" to 144"
To fit pallet
Specified
Depth
18" to 48"
24" to 48"
2+ pallets
18" to 48"
Height
5' to 12'
8' to 24'
2+ pallets
8' to 16'
FINISH
Racks are usually coated
with an industrial enamel paint.
ASSEMBLY
Uprights are raised to
a vertical position and the beams are clipped into place. A
safety pin or bolt is then installed to prevent accidental removal
of the beam. Shims may be required to level and plumb the rack
on uneven floors.
Bases are bolted to uprights. The
spreaders and arms are bolted into place.
NOTES:
These are general specifications from a variety of manufacturers.
There may be differences between these descriptions and
some specific brands. Please call us with any specific questions
concerning storage racks.
Most heavier racks require anchoring to the floor. Floor
surfaces such as wood or asphalt may require special floor
preparation.
Sizes other than those shown above are available for
special applications.
